Touch Screen Digitizer For Lexus IS IS250 IS300 IS350 ISF LTA070B510F
Touch Screen Digitizer For Lexus GS GS300 GS350 GS430 GS450 GS450h LTA070B510F
Touch Screen Digitizer For Lexus RX RX300 RX330 RX350 RX400h LTA070B510F
Replace Cracked Lexus LCD Display Touchscreen Glass Panel LTA070B510F
Touch Screen Digitizer For Lexus GX GX470 LTA070B510F
Touch Screen Digitizer For 1999-2009 Lexus Radio Repair Replace LTA070B510F

    Navigation Touch Screen Digitizer Fit For Lexus® IS GS RX IS250 IS350 ISF MFD

    $50.00 USD
    • Fit for LEXUS® IS250 IS300 IS350 IS-F, GS300 GS350 GS430 GS450h, RX300 RX330 RX350 RX400h, Toyota® Prius, GX470.
    • For GPS navigation touch screen digitizer, luxury audio unit, MFD, radio control system.
    • Replace touch screen having following problems: Loss of response to touch commands, scratches, cracks, dead pixels, or the polarized protection is wearing off etc..
    • Size: 7.0 inch. 4-pins cable ribbon connector.
    • Compatible with Part number: LTA070B510F / LTA070B511F / LTA070B512F.
    Features & Specifications:
    • Brand new, high quality and good operation radio touch screen replacement for Lexus®.
    • For GPS Navigation Touch Screen Digitizer or MFD.
    • Size: 7.0in.
    • Thickness: 1.8mm.
    • Length of FPC (flexible print circuit): 34mm.
    • Working voltage: 5V.
    • Interface: 4-pin.
    • Special feature: Support Can-Bus.
    • Main material: Glass.
    • Type: Resistive touch screen.
    Compatible with:
    • Fit For 2006/2007/2008/2009 Lexus® IS250, IS300, IS350, IS-F.
    • Fit For 1999-2009 Lexus® GS300, GS350, GS430, GS450h.
    • Fit For 2004-2009 Lexus® RX300, RX330, RX350, RX400h.
    • And some other models that use the 4-pin/wire touchscreen.
    Attention:
    • Installation instructions not included. Tool not included.
    • It is only a touch panel, not including a LCD display.
    • Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please feel free to contact us.
    • There is a layer of protective film on each surface of the panel. Please remove the protective film before using it.
    • There is a layer of polarizer film on the front of the panel (Under the protective film). If it is blurry after installation, please remove the polarizer film. If it is clear, please don't remove it. As shown in the last picture.
    Package included:
    1x Touch screen

    All mentioned marks or registered trademarks are property of their respective owners. Get more details on 'Trademarks' page.
    BACK TO TOP